10 Nov

Tips for Choosing the Correct Pneumatic Fittings

tips-for-choosing-the-correct-pneumatic-fittings

 

 

Typically, you will find a range of varying pneumatic fittings easily in the market. However, the problem is that choosing an appropriate one is not simple. To take the right decision, you must be aware of the tubing to be utilized, the functional pressure of air, type of thread required for the receiving fitting, and lastly, the extent of vibration tolerable by the fitting.

 

Commonly Used Fittings

Outlined below are some of the common kinds of pneumatic fittings to help you choose the right one:

 

Quick Connect Couplings

Quick Connect Couplings are indispensable when it comes to connections that direct the flow of gas, water or air. Alternatively known as quick disconnect or quick release couplings, they offer a swift connection for transferring fluids. Usually operated manually, they serve as a great substitute for threaded and flanged connections.

 

Check Valves

In the simplest sense, check valves permit the flow in a single direction; hence, preventing reverse flow. Being a self-automated valve, they consistently work even if the manufacturing facility falls short of air, electricity or manual assistance. Not just manufacturing plants, check valves are found everywhere – even homes. In case you have a sump pump, it must have a check valve fitted over the discharge line. Check valves are utilized in every industry that makes use of pumps.

 

Hi-Duty Flareless Fittings

These fittings fall into the sub-category of compression fittings. However, they are particularly made applications that involve high pressure; usually more than 1000 PSI.

 

Push-Connect Fittings

Push-Connect Fittings use a similar mechanism as compression fittings. However, instead of using a metal-ferrule, these fittings utilize an O-ring (made using vulcanized rubber) that possesses the ability to get its actual shape let loose.

Consequently, this feature permits the fitting to get easily undone—just the way it was manufactured. Push-connect fittings have applications that involve lesser pressure. These fittings are extremely simple to connect, disconnect and then reconnect, ideal for applications that involve frequent alterations. Moreover, they can be utilized with brass, steel, copper, nylon, etc.

In addition to the above stated pneumatic fittings, there are a range of varying options, depending on the application. The more different the job requirements are, the more atypical the fittings will be.

Generally, compression fittings, push-connect fittings, specialty compression fittings can be easily bought and utilized for a broad array of applications. Find a comprehensive range of pneumatic fittings at SEALEXCEL.

Recognized as one of the finest pneumatic fittings manufacturers and suppliers, we additionally manufacture stainless steel push-in fittings, push-on fittings, monoflange valves, and more.

 

Sourced by ekomeri.com

02 Feb

DK-Lok Instrumentation Pipe & Weld Fittings

DK-Lok Instrumentation Pipe Weld Fittings

DK-Lok Instrumentation Pipe Weld Fittings

Features of DK-Lok Thread Fittings

  • Wrench flat body design allowing standard Hex. wrench assembly.
  • Attractive finishes to suit precision equipment.
  • Much less-weight design compared to Class 3000 pipe fittings.
  • Fine pipe thread construction equals or exceeds the requirement of ASME B1.20.1 to ensure maximum thread engagement.
  • Male pipe threads capped for protection from damages.
  • Fitting materials available in SS316, Brass and Carbon Steel.

Read more about DK-Lok Instrumentation Pipe & Weld Fittings